Difficulty Soldering PIC10LF322 and DRV8838 to PCB Without Solder Mask
Hello, if you are facing challenges soldering a PIC10LF322 in a DFN8 package and a DRV8838 from TI in a WSON package to your PCB without solder mask, you are not alone. Many DIY enthusiasts encounter similar issues when trying to hand solder components without the aid of solder mask.
One common method is to try feeding solder to the board, hoping it will flow under the package, but this approach often proves ineffective. Another attempt involves cutting a stencil from metal to apply solder paste, but achieving proper adhesion can be tricky without the right tools.
If you have watched videos or read resources online, you may have noticed that most tutorials use PCBs with solder mask, which simplifies the soldering process. Without this protective layer, soldering becomes more challenging.
One suggestion is to experiment with different stencil thicknesses to see if it improves the soldering outcome. Alternatively, you could consider outsourcing the PCB fabrication to professionals who have the equipment and expertise to handle such intricate tasks.
Before making a decision, weigh the pros and cons of each approach. If you have any success stories or additional tips to share, feel free to contribute to the discussion. Your experience could help others facing similar soldering dilemmas.
